IF your jacket has a MOLDED TOOTH Zipper:
These are auto-lock pulls with a 5/8" handle or pull.
Jacket Zippers normally have an AUTO-LOCK head or slider. That means the pull stops opening or closing when you stop pulling.
Some manufacturers call this a "sport" zipper.
#5 Molded tooth zippers, or 5mm across the closed zipper, are normally on medium weight jackets. If there is an 8V on the back of the head it is probably a #8 molded pull. The "V" stands for Vislon which is a type of plastic used in a molded tooth zipper.
I try to stock 90% of the pulls that will fit, but impossible to carry all of them....... SO if you can't determine what sort of zipper you have on your jacket, text me a picture of your zipper at the BOX & PIN end (bottom). Also with a picture of the zipper head. I'll see if I can identify it.
My CELL PHONE: 970.231.1434
PLEASE understand that I get over 100 texts per day, 200 phone calls before 10am in Colorado & yes, over 1,000 emails a DAY, or there are a whole lot of broken zippers out there. AND if you text on weekends, I'll respond on Monday.
I personally answer all these missives. PLEASE do not leave me a message on my phone & an email & a call. It will just take me longer to get back to you. Unless your smart phone is smarter than you are, TEXT the pictures. TEXT me messages.
I am HAPPY to give you my expertise from 60 years of replacing zippers & 32 years of being the Zipper Lady. But you need to know, I DON'T KNOW EVERYTHING & I'm just giving you my best guess.
[ITEMPRICE]